1. 제조방법
1) Styrene과 Acrylonitrile의 Copolymerization
라디칼 중합에 의한 공중합 반응에 있어서, 생성되는 공중합체의 조성은 각 단량체의 조성은 각 단량체의 조성은 각 단량체의 상대적 반응성과 농도에 의해서 조절된다.
어떤 한 단계에서 생성된 공중합체 중의 단량체 M의 몰분율을 F₁그 단
접착제용 폴리머의 대부분은 유기용매를 사용하는 폴리머가 주종을 이루며, 이들 유기용매를 사용한 폴리머는 용매 방출에 따른 환경오염이 심각하여, 현재 용매 방출에 대한 규제로 인해 접착제용 폴리머의 제조 기술의 전환이 요구되어 이에 부응한 수용성 폴리머에 대한 연구가 활발히 진행되고 있
properties.
Because of the extraordinary range of properties of polymeric materials, they play an essential and ubiquitous role in everyday life. This role ranges from familiar synthetic plastics and elastomers to natural biopolymers such as nucleic acids and proteins that are essential for life.
Most commonly, the continuously linked backbone of a polymer used for the preparation of plastics c
1.Tiltle
Synthesis of PVAc and PVA
2.Objective
PVA(poly vinyl alcohol) is prepared by hydrolysis of PVAc, which is synthesized by emulsion polymerization of vinyl acetate.
3.Theory
◇ Background
-PVA
Polyvinyl alcohol has excellent film forming, emulsifying, and adhesive properties. It is also resistant to oil, grease and solvent. It is odorless and nontoxic. It has high tensile
*’Nano’ means….
Nanometer: one billionth of a meter
Nano-: prefix comes from the Greek word for ‘dwarf’
Chemical, physical, and biological properties that differ from those of their larger, or bulk counterparts
Nanotechnology: The National Nanotechnology Initiative(NNI)-> the science of materials and phenomena in the range of 1 to 100nm in diameter
*Features of ‘nanoparticles
emulsion by increasing its kinetic stability
Consists of a water-loving hydrophilic head and an oil-loving hydrophobic tail.
The hydrophilic head is directed to the aqueous phase and the hydrophobic tail to the oil phase
The emulsifier positions itself at the oil/water or air/water interface
Reduced the surface tension, has a stabilizing effect on the emulsion.
Affect the textur
내용물을 방출할 수 있도록 포장하는 기술
1. Atomizing conditions
① Stirring time
② Bath type ultrasonication
③ Horn type ultrasonication
2. Ultrasonication시 온도 유지 → 냉각기
3. W/O/W Emulsion conditions
- Bath type ultrasonication → 1hr 균질(450rpm)
→ 동결건조
emulsions can help to swell the SC, increasing the ability of actives to penetrate skin.
2-2 IN w/o emulsions, water is slowly released & reaches the upper layers of skin .
Enhanced hydrated skin can result in an additional twofold to threefold increase in the rate of absorption to water & other polar molecules in skin.
3. Occlusive vehicles :
①Suppress transepidermal water loss.
우유의 유지방은 대부분 직경 0.1-15 µm의 지방구내에 존재한다. 따라서 우유는 oil-in-water emulsion이다. 이로 인해 몇 가지 성질이 나타난다. 즉 어떠한 에머련(emulsion)도 완전히 안정하지 않으며 지방의 모든 이화학적 반응은 각 지방구 에서 독립적으로 시작된다. 지방과 유장(milk serum) 간의 모든 상호
Emulsion)이라고 하며, 반드시 이 에멀젼의 맛을 보면서 질감 Texture이나 간이 적절한지 확인 하는 것이 좋다.
④ 향신료 및 식품첨가물 처리 (Additives / Spice)
원료육의 Grinding, Mixing 작업이 끝나면, 혹은 동시에 준비된 첨가물과 향신료를 사용하여 햄/소시지를 '식품'으로 만들어내는 공정이 필요하다.
각